Our Products
- Induction Heaters
- Tyre Induction Heater
- Electric Induction Heater
- Bearing Induction Heater
- Industrial Induction Heaters
- Scissor lifter
- Hydraulic Puller
- Hydraulic Stacker
- Hydraulic Press
- Hydraulic Motorized Pallet
- Hydraulic Power Pack
- Hydraulic Equipment
- Oil injection pump
- CTRB puller cum installer
- Motorized Roller Bearing Extractor
- CTRB Jack Type Puller
Induction Heaters
We offer our customers with a vast assortment of induction heaters that are exclusively designed to for the functions of mounting and dismounting the roller bearings, pinions, gears or other component fitted on axle shaft of machine or motors. The presence of latest technology intelligent microcontroller based electronic controls enables in performing these functions in a simple and effective manner. Moreover, the automated roll sliding arrangement and remote control facility provides with improved flexibility for utilizing the equipment.
Our range of induction heaters comprises industrial induction heaters, commercial induction heater, portable induction heaters, electric induction heater, conventional induction heater, electric heaters and induction bearing heater.
Induction Heater
Item Code: PIH2004
Our clients can avail from us a range of conventional Induction Heater (Model PIH 2004) that has heavy capacity to heat the components and is equipped with the latest technology micro controller based electronic control. This assortment of conventional induction heater model PIH 2004 is equipped with manual or automated roll-sliding arrangement for the standard yoke 105 x 105 x 620 mm.
Features of conventional induction heater are as under :
» The Roll-Sliding Arrangement is designed in a manner that the yoke gets lifted mechanically or automatically rolls off from the vertical supports, without rubbing or damaging and scraping mating surfaces
» This design lends additional safety, ease of operation and also results in better productivity
» Weight: 300kg
» It can heat a bearing of 700 kg to temperature as per requirement in customized time
Induction Heater
Item Code: PIH-2004-SPL
Our clients can avail from us a range of conventional Induction Heater (Model PIH 2004) that has heavy capacity to heat the components and is equipped with the latest technology micro controller based electronic control. This assortment of conventional induction heater model PIH 2004 is equipped with manual or automated roll-sliding arrangement for the standard yoke 110 x 110 x 620 mm.
Features of conventional induction heater are as under :
» The Roll-Sliding Arrangement is designed in a manner that the yoke gets lifted automatically rolls off from the vertical supports, without rubbing or damaging and scraping mating surfaces
» This design lends additional safety, ease of operation and also results in better productivity
» Weight: 400kg
» It can heat a bearing of 1200kg.Temperature as per requirement in customized time
Induction Heater
Item Code: PIH-2004
Precision induction heater is available as Model PIH 2004.
The features of our induction heaters are:
» Swing arm arrangement
» BOOSTUP facities
» Heating job of 430 kg
Industrial Induction Heater
We manufacture an array of Industrial Induction Heater (Model PIH 2003) that has heavy capacity to heat the components and has intelligent micro controller based electronic control, similar to PIH- 2002. Competitively priced. These industrial induction heaters can also be customized as per the specific requirements of our clients.
Features of industrial induction heater are as under :
» It weights about 86 kg
» It can heat a bearing of 40 kg to 50 kg to temperature of 100oC in 6-7 minutes
This model is provided with manual or automated Roll-sliding Arrangement for the standard yoke 80x80x490 mm
» The Roll- Sliding Arrangement is so designed that the yoke gets lifted mechanically or automatically rolls off from the vertical supports without rubbing or damaging and scraping mating surfaces
» This arrangement provides additional safety, ease of operation and helps to improve productivity
Portable Induction Heater
Available with us is an assortment of Portable Induction Heater -series PIH 2001 that is designed for the purpose of heating the bearings and other shrink-fit components, before their mounting while employing the latest technology micro controller based electronic controls. The rough handling and faulty installation or mounting methods may result in reduced operational life of the bearings and other torque transmitting steel components, which are shrunk-fit on shaft.
Features of portable induction heater are as under:
» This induction heater is available in 5 different models for mounting, range of bearings having bore size from 14 mm and above
» Its primary features are fast, safe and economical heating of bearings
» It is light weight and portable, ensuring better performance
» Power capacity: 3.5 / 4.0 KVA
» The controls are intelligent micro controller based programmable electronic controls
» It has two operating modes, Temperature mode and Time mode that are controlled through feather touch key Board and both these modes can be seen at the time of operation
» It can be used to heat bearings of larger diameter using a pair of Raiser Blocks size 55 x 55 x 125 mm
» By placing the plate in place of the horizontal yoke across the Induction Heater vertical supports, the unit can also be used to heat a plate of any magnetic material.
Induction Bearing Heater
We offer a gamut of induction bearing heater (Model PIH 2002) that has medium capacity to heat the components and comprises the control mounted on main body of induction bearing heater and a remote control is also provided for higher efficiency.
Features of induction bearing heater are as under :
» It consists of intelligent micro controller based electronic controls
» It weights about 44 kg
» It can heat a bearing of 28 kg to 30 kg to temperature of 100oC in 5 minutes
» It can be easily carried to the site of operation, using specially designed handle provided on both sides.
Induction Tyre Heater
We offer a gamut of Induction Tyre Heater (Model PIH 2005) that has the highest capacity to heat the components and have intelligent micro controller based electronic controls with data logger that can upload all the data month wise.
Features of induction tyre heater are as under :
» Weight: About 3 Ton
» It can heat the Railway Wheel Tyre within 15 to 20 minutes
» This model is provided with automated Roll-sliding Arrangement for horizontal yoke and operated automatically and manually in case of power failure
» The design of this automated Roll-Sliding Arrangement is such that the yoke gets lifted automatically rolls off from the vertical supports without rubbing or damaging and scraping mating surfaces
» This also result in additional safety, ease of operation and helps to improve productivity.
Precision Induction Heater
Item Code: PIH-SPL 2001 - 2002 - 2003
Precision induction heater is available as Model PIH SPL. The features of our induction heaters are:
» Swing arm / roll sliding arrangement.
» BOOST-UP facities.
» Heating job of 300 kg.
Induction Heater
PRECISION Induction Heater - Series PIH SPL - is designed to heat the Bearings and other shrink-fit components prior to mounting using latest technology intelligent microcontroller based electronic controls.
The life of Bearings and other torque transmitting steel components, which are shrunk-fit on shaft, may get cut short due to rough handling and faulty installation or mounting methods. This can be avoided by expanding them by induction heating for the purpose of mounting of the component.
Precision Induction Heaters - Series PIH SPL - are available in 5 different models for mounting, range of bearings having bore size from 14 mm and above. Fast, safe and economical heating of bearings is best features of PIH SPL Induction heaters.
PIH series is light weight and portable for better performance. It has power capacity of 3.5 / 4.6 KVA. The controls are intelligent microcontroller based programmable electronic controls. It has two operating modes, Temperature mode and Time mode. Both are controlled through feather touch key Board. Both modes can be seen at the time of operation. It can also be used to heat bearings of larger diameter. The unit can also be used to heat a plate of any magnetic material by placing the plate in place of the horizontal yoke across the vertical supports.